dmesg - NVIDIA GeForce GTX 660
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cc101fff] usable
BIOS-e820: [mem 0x00000000cc102000-0x00000000cc53ffff] reserved
BIOS-e820: [mem 0x00000000cc540000-0x00000000cc64dfff] ACPI data
BIOS-e820: [mem 0x00000000cc64e000-0x00000000cc873fff] ACPI NVS
BIOS-e820: [mem 0x00000000cc874000-0x00000000cd717fff] reserved
BIOS-e820: [mem 0x00000000cd718000-0x00000000cd718fff] usable
BIOS-e820: [mem 0x00000000cd719000-0x00000000cd79efff] ACPI NVS
BIOS-e820: [mem 0x00000000cd79f000-0x00000000cdbdffff] usable
BIOS-e820: [mem 0x00000000cdbe0000-0x00000000cdff3fff] reserved
BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/X79-DELUXE, BIOS 0403 09/02/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFE0000000 write-back
2 base 000820000000 mask 3FFFF0000000 write-back
3 base 0000CF000000 mask 3FFFFF000000 uncachable
4 base 0000D0000000 mask 3FFFF0000000 uncachable
5 base 0000E0000000 mask 3FFFE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 512MB, type WB
reg 2, base: 33280MB, range: 256MB, type WB
reg 3, base: 3312MB, range: 16MB, type UC
reg 4, base: 3328MB, range: 256MB, type UC
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 32752M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3312MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 16GB, type WB
reg 7, base: 32GB, range: 512MB, type WB
reg 8, base: 33280MB, range: 256MB, type WB
e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd960-0x000fd96f] mapped at [ffff8800000fd960]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
[mem 0x82fe00000-0x82fffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
[mem 0x82c000000-0x82fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x82bffffff]
[mem 0x800000000-0x82bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcc101fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcbffffff] page 2M
[mem 0xcc000000-0xcc101fff] page 4k
init_memory_mapping: [mem 0xcd718000-0xcd718fff]
[mem 0xcd718000-0xcd718fff] page 4k
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0xcd79f000-0xcdbdffff]
[mem 0xcd79f000-0xcd7fffff] page 4k
[mem 0xcd800000-0xcd9fffff] page 2M
[mem 0xcda00000-0xcdbdffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xcdff4000-0xcdffffff]
[mem 0xcdff4000-0xcdffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x35eee000-0x36f6efff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000cc576070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cc5804b8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000cc576168 0A34D (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 00000000cc86b080 00040
ACPI: APIC 00000000cc5805c8 00100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000cc5806c8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000cc580710 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000cc580750 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: BGRT 00000000cc64db60 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000cc5807e0 CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082fffffff]
Initmem setup node 0 [mem 0x00000000-0x82fffffff]
NODE_DATA [mem 0x82fff8000-0x82fffcfff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080f600000-ffff88082f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcc101fff]
node 0: [mem 0xcd718000-0xcd718fff]
node 0: [mem 0xcd79f000-0xcdbdffff]
node 0: [mem 0xcdff4000-0xcdffffff]
node 0: [mem 0x100000000-0x82fffffff]
On node 0 totalpages: 8373485
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13014 pages used for memmap
DMA32 zone: 832848 pages, LIFO batch:31
Normal zone: 117760 pages used for memmap
Normal zone: 7536640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcc102000-0xcc53ffff]
PM: Registered nosave memory: [mem 0xcc540000-0xcc64dfff]
PM: Registered nosave memory: [mem 0xcc64e000-0xcc873fff]
PM: Registered nosave memory: [mem 0xcc874000-0xcd717fff]
PM: Registered nosave memory: [mem 0xcd719000-0xcd79efff]
PM: Registered nosave memory: [mem 0xcdbe0000-0xcdff3fff]
PM: Registered nosave memory: [mem 0xce000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xce000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s86720 r8192 d23872 u131072
pcpu-alloc: s86720 r8192 d23872 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8242626
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32868708K/33493940K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 625232K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1184 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.065 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.13 BogoMIPS (lpj=12800260)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 OK
Brought up 12 CPUs
smpboot: Total of 12 processors activated (76801.56 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcc64e000-0xcc873fff] (2252800 bytes)
PM: Registering ACPI NVS region [mem 0xcd719000-0xcd79efff] (548864 bytes)
regulator-dummy: no parameters
RTC time: 13:57:19, date: 10/22/13
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x10) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb12a000-0xfb12afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb129000-0xfb12900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb128000-0xfb128fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb127000-0xfb1273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb120000-0xfb123fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb126000-0xfb1263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb125000-0xfb1257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb124000-0xfb1240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:04:00.0: reg 0x24: [mem 0xfbc10000-0xfbc107ff]
pci 0000:04:00.0: reg 0x30: [mem 0xfbc00000-0xfbc0ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfbb00000-0xfbb07fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfba00000-0xfba07fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfb900000-0xfb907fff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:09:00.0: [14e4:43b1] type 00 class 0x028000
pci 0000:09:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:09:00.0: reg 0x18: [mem 0xfb200000-0xfb3fffff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb4fffff]
pci 0000:0a:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0a:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:0a:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:0a:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:0a:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:0a:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:0a:00.0: reg 0x24: [mem 0xfb800000-0xfb8001ff]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:0b:00.0: reg 0x18: [mem 0xfb700000-0xfb700fff 64bit]
pci 0000:0b:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0b]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.5: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:0c:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x10: [io 0xa050-0xa057]
pci 0000:0c:00.0: reg 0x14: [io 0xa040-0xa043]
pci 0000:0c:00.0: reg 0x18: [io 0xa030-0xa037]
pci 0000:0c:00.0: reg 0x1c: [io 0xa020-0xa023]
pci 0000:0c:00.0: reg 0x20: [io 0xa000-0xa01f]
pci 0000:0c:00.0: reg 0x24: [mem 0xfb600000-0xfb6001ff]
pci 0000:00:1c.7: PCI bridge to [bus 0c]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcc102000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd719000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdbe0000-0xcfffffff]
e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb4fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.5: PCI bridge to [bus 0b]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.5: bridge window [mem 0xda100000-0xda1fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 0c]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:09: resource 1 [mem 0xfb200000-0xfb4fffff]
pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0a: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0b: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:0b: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0c: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0d: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0d: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0d: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0d: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16900K (ffff880035eee000 - ffff880036f6f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc8102000-0xcc102000] (64MB) mapped at [ffff8800c8102000-ffff8800cc101fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1382450238.704:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb127000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb126000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 64 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 71 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb3: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 79 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb5: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb6: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:08:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 87 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb7: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 8
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb8: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 1:499:989
machinecheck machinecheck2: hash matches
memory memory32: hash matches
rtc_cmos 00:03: setting system clock to 2013-10-22 13:57:20 UTC (1382450240)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[173]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 88 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0b:00.0: irq 89 for MSI/MSI-X
r8169 0000:0b:00.0 eth0: RTL8168g/8111g at 0xffffc9000303e000, ac:22:0b:cb:b2:cf, XID 0c000800 IRQ 89
r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
usb 1-1: new high-speed USB device number 2 using ehci-pci
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125100 irq 88
ata2: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125180 irq 88
ata3: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125200 irq 88
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125300 irq 88
ata6: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125380 irq 88
ahci 0000:04:00.0: irq 90 for MSI/MSI-X
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 91 for MSI/MSI-X
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pio
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10100 irq 90
ata8: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10180 irq 90
ata9: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10200 irq 90
ata10: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10280 irq 90
ata11: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10300 irq 90
ata12: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10380 irq 90
ata13: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10400 irq 90
ata14: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10480 irq 90
ahci 0000:0a:00.0: irq 92 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi14 : ahci
scsi15 : ahci
ata15: SATA max UDMA/133 abar m512@0xfb800000 port 0xfb800100 irq 92
ata16: SATA max UDMA/133 abar m512@0xfb800000 port 0xfb800180 irq 92
ahci 0000:0c:00.0: irq 93 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:0c:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi16 : ahci
scsi17 : ahci
ata17: SATA max UDMA/133 abar m512@0xfb600000 port 0xfb600100 irq 93
ata18: SATA max UDMA/133 abar m512@0xfb600000 port 0xfb600180 irq 93
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) ac:22:0b:cb:af:af
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ATAPI: ASUS BW-14D1XT, 1.00, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM ASUS BW-14D1XT 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
ata17: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
ata11: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
scsi 13:0:0:0: Attached scsi generic sg3 type 3
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: new high-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3200.075 MHz
usb 3-1: New USB device found, idVendor=174c, idProduct=2074
usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-1: Product: ASM107x
usb 3-1: Manufacturer: ASUS Tek.
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
ata16: SATA link down (SStatus 0 SControl 300)
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted.
ata18: SATA link down (SStatus 0 SControl 300)
usb 4-1: New USB device found, idVendor=174c, idProduct=3074
usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-1: Product: ASM107x
usb 4-1: Manufacturer: ASUS Tek.
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[414]: starting version 204
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
lp: driver loaded but no devices found
wmi: Mapper loaded
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Receiver
usb 2-1.1: Manufacturer: Logitech
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 94 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
snd_hda_intel 0000:00:1b.0: irq 95 for MSI/MSI-X
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
type=1400 audit(1382443041.901:2): apparmor="STATUS" operation="profile_load" parent=484 profile="unconfined" name="/sbin/dhclient" pid=486 comm="apparmor_parser"
type=1400 audit(1382443041.901:3): apparmor="STATUS" operation="profile_load" parent=484 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
type=1400 audit(1382443041.901:4): apparmor="STATUS" operation="profile_load" parent=484 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
type=1400 audit(1382443041.901:5): apparmor="STATUS" operation="profile_replace" parent=484 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
type=1400 audit(1382443041.901:6): apparmor="STATUS" operation="profile_replace" parent=484 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
type=1400 audit(1382443041.901:7): apparmor="STATUS" operation="profile_replace" parent=484 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
type=1400 audit(1382443041.905:8): apparmor="STATUS" operation="profile_replace" parent=491 profile="unconfined" name="/sbin/dhclient" pid=495 comm="apparmor_parser"
type=1400 audit(1382443041.905:9): apparmor="STATUS" operation="profile_replace" parent=491 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=495 comm="apparmor_parser"
type=1400 audit(1382443041.905:10): apparmor="STATUS" operation="profile_replace" parent=491 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=495 comm="apparmor_parser"
hda_codec: ALC1150: SKU not ready 0x00000000
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
INFO @wl_cfg80211_attach : Registered CFG80211 phy
EDAC MC: Ver: 3.0.0
lib80211_crypt: registered algorithm 'TKIP'
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x710
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
usb 2-1.5: new full-speed USB device number 4 using ehci-pci
eth2: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x710
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
asus_wmi: Disabling ACPI video driver
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:046D:C52B.0003/input/input10
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1d.0-1.1:1
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:046D:C52B.0003/input/input11
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1d.0-1.1:2
usb 2-1.5: New USB device found, idVendor=0b05, idProduct=17cf
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: BCM20702A0
usb 2-1.5: Manufacturer: Broadcom Corp
usb 2-1.5: SerialNumber: 240A646E79CF
usb 3-1.4: new high-speed USB device number 3 using xhci_hcd
Switched to clocksource tsc
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
usb 3-1.4: New USB device found, idVendor=04a9, idProduct=1908
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: CanoScan
usb 3-1.4: Manufacturer: Canon
WARNING! power/level is deprecated; use power/control instead
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.32 Wed Jun 19 15:51:20 PDT 2013
init: failsafe main process (749) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (846) terminated with status 1
e1000e 0000:00:19.0: irq 91 for MSI/MSI-X
e1000e 0000:00:19.0: irq 91 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:0b:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: udev-fallback-graphics main process (1152) terminated with status 1
init: plymouth-splash main process (1170) terminated with status 1
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
systemd-hostnamed[2833]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[16175]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[10690]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[11015]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[12502]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
audit_printk_skb: 189 callbacks suppressed
type=1400 audit(1382507248.451:74): apparmor="STATUS" operation="profile_replace" parent=5459 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5463 comm="apparmor_parser"
type=1400 audit(1382507248.451:75): apparmor="STATUS" operation="profile_replace" parent=5459 profile="unconfined" name="/usr/sbin/cupsd" pid=5463 comm="apparmor_parser"
type=1400 audit(1382507248.451:76): apparmor="STATUS" operation="profile_replace" parent=5459 profile="unconfined" name="/usr/sbin/cupsd" pid=5463 comm="apparmor_parser"